The automatic polyelectrolyte preparation and dosing system consists of a rectangular tank divided into three compartments
First compartment, for dilution, is complete with polyelectrolyte loading hopper, micro-screw dispenser and relevant variable speed drive, fast mixer for the polyelectrolyte mixing, inflow system for the dilution water and solenoid valve, flow meter. The mixing chamber with the a vigorous flow of water starts the initial mixing.
Second compartment,for the polyelectrolyte mixture maturation & homogenization, is equipped with slow mixer and bottom suction and drain system
The third compartment, for maturation and storage, is used for storing the mixture. It is provided with a slow mixer, suction and delivery system for the polyelectrolyte solution.
Every mixer has two impellers fitted on its shaft, each one with four sloping blades. The polyelectrolyte preparation happens automatically: in fact, once the concentration (from 0.05% to 0.5% by weight) has been established, the dosing of dilution water and polyelectrolyte starts automatically. The solution at the TADPS outlet can be further diluted, if required.
The preparation unit is provided with alarms activated by the failure of the dosing screw or shortage of dilution water, insufficient level of polyelectrolyte in the hopper, faulty operation of the stirrer. The powder dispenser is an equipment with a screw and a heater arrangement to remove moisture if any. The standard construction is in stainless steel.
We Supply Automatic Poly Dosing System in UAE, Qatar, Dubai, Oman, Iraq, Mexico, US, Canada, Brazil, Phillipines, Bangladesh, Indonesia, Australia, Malaysia, kenya
| POLYMER DOSING SYSTEM | DS CAPACITY (Kgds/h) | POLYMER PUMP - FLOW & HEAD |
|---|---|---|
| AUTO POLYMER DOSING | ||
| TAPDS-250 | 1-3 | 0-20L/h P-1.0MPa |
| TAPDS-500 | 5-7 | Q=30L/h P=1.0MPa |
| TAPDS-500 | 10-14 | 0-50L/h P=1.0MPa |
| TAPDS-500 | 20-28 | Q-100L/h P-1.0MPa |
| TAPDS-500 | 15-20 | Q-90L/h P-1.0MPa |
| TAPDS-500 | 30-40 | Q=150L/h P=1.0MPa |
| TAPDS-500 | 45-60 | Q=270L/h P=1.0MPa |
| TAPDS-500 | 50-70 | Q=300L/h P=1.0MPa |
| TAPDS-1000 | 100-140 | Q=600L/h P=1.0MPa |
| TAPDS-1000 | 150-210 | Q-900L/h P=1.0MPa |
| TAPDS-1500 | 200-280 | Q=1200L/h P=1.0MPa |
| TAPDS-500 | 100-120 | Q=300L/h P=1.0MPa |
| TAPDS-1000 | 200-240 | Q=600L/h P=1.0MPa |
| TAPDS-2000 | 300-360 | Q-900L/h P=1.0MPa |
| TAPDS-3000 | 400-480 | Q=1200L/h P=1.0MPa |
| TAPDS-1000 | 130-160 | Q-900L/h P=1.0MPa |
| TAPDS-2000 | 260-320 | Q=1.8m3/h P=1.0MPa |
| TAPDS-3000 | 390-480 | Q=2.7m3/h P=1.0MPa |
| TAPDS-4000 | 520-640 | Q=3.6m3/h P-1.0MPa |
| TAPDS-2000 | 260-320 | Q=1.7m3/h P=1.0MPa |
| TAPDS-3000 | 390-480 | Q=3.4m3/h P=1.0MPa |
| TAPDS-5000 | 390-480 | Q-5m3/h P=1.0MPa |
| APDS-7000 | 520-640 | Q=7m3/h P=1.0MPa |
